Introduction
Deep bass, clean mids, and sharp highs abound from JBL Tune 710BT headphones. Some users, meanwhile, could run across problems with sound quality including distortion, poor loudness, unbalanced audio, or Bluetooth interference. This article will enable you quickly troubleshoot and fix any of these issues.
Typical JBL Tune 710BT Headphone Sound Quality Problems
Let’s first review some typical sound-related problems JBL Tune 710BT users encounter before delving into fixes:
Audio cutting off or Bluetooth interference; Low volume despite highest settings; Uneven sound balance (one ear louder than the other; Poor bass or weak soundstage
How to Correct JBL Tune 710BT Sound Quality Problems
1. Change Equilibrium Settings
Usually, adjusting the equalizer settings helps to fix most sound quality problems. Equalizers are included into many cellphones and music apps. Please follow these guidelines:
On Android, search options > Sound & vibration > Advanced sound options > Equalizer.
Use the equalizer in Apple Music via Settings > Music > EQ. On Windows or Mac, use outside programs like Boom 3D or FX Sound.
To reach the ideal balance, try several presets including “Vocal” or “Bass Boost”.
2. Verify Updated Firmware
JBL periodically releases firmware changes meant to increase performance. Audio problems can result from obsolete firmware.
- Get the JBL Headphones App (available for iOS and Android).
- Connect your headphones then search for firmware changes.
Install an update using the on-screen instructions should one be available.
3. Sort Your Headphones
Muffled audio results from dust and trash blocking the headphone speakers. Please clean your JBL Tune 710BT as shown:
Dirt can be removed with a soft-bristled brush or a dry microfiber cloth.
To softly clean the ear cushions, if needed, dab a little isopropyl alcohol on a cotton swab.
Steer clear of strong chemicals or water since they could ruin the headphones.
4. Review Bluetooth Interference
Should you find chopped or distorted sound, interference from other Bluetooth devices could be the result.
How to Fix: Stow your headphones within 30 feet of your gadget.
Steer clear of places with several Bluetooth signals (such as around smart home gadgets or Wi-Fi routers).
Cut pointless Bluetooth connections off of your PC or phone.
From Bluetooth settings, experiment switching audio codecs from AAC to SBC or vice versa.
5. Reset your JBL Tune 710BT.
One can fix ongoing sound issues with a reset. To re-set your JBL Tune 710BT:
One should turn off the headphones.
For ten seconds, concurrently press and hold the Volume Up and Volume Down buttons.
The headphones will power off while the LED light flashes.
Reconnect the headphones to your gadget and listen for changes.
6. Review Connections and Audio Source
Your audio source might be the cause of poor sound quality; the headphones might not be at blame.
Make sure your music streaming quality is high (Spotify Premium settings let you vary streaming quality to “Very High”).
Look for damage on the AUX cable if you have a wire connection.
Should you be utilizing Bluetooth, unpair and reconnect your gadget.
7. Change Sound Balance (for unequal audio)
Should one side dominate the other:
On Android: Search Settings > Accessibility > Audio balance.
On Apple: Change by navigating to Settings > Accessibility > Audio/Visual > Balance.
8. Control Power and Battery
Audio performance can suffer with low battery. For best sound quality, charge your headphones above 50%.
READ ABOUT:Sennheiser Accentum Plus: Your Complete Black Friday Bargain Guide
Common Questions (FAQs)
1. Why is my 710BT JBL Tune’s sound muffled?
dirty ear cushions, Bluetooth interference, or wrong equaliser settings could all cause muffled sound. Try EQ settings adjustment and cleaning your headphones.
2. How might I reset my JBL Tune 710BT headphones?
For 10 seconds press and hold the Volume Up and Volume Down buttons until the LED indicator flashes. This will reset your headphones.
3. On JBL Tune 710BT, how can I raise bass?
Change the EQ settings in the audio settings of your device or use programs like Boom 3D. Make sure your headphones have current firmware as well.
4. Why is my JBL Tune 710BT audio cutting in and out?
This can result from Bluetooth interference, low battery, or too much distance from the connected device. Eliminate possible signal interferences and keep your headphones near to your gadget.
5. For improved sound, may I use JBL Tune 710BT connected wire-wise?
Indeed! Particularly for gaming or video viewing, using a 3.5mm AUX cable (included) can offer more consistent audio quality.
Final Thought
Although JBL Tune 710BT headphones have great quality, occasionally audio problems can develop. You will have perfect sound by changing EQ settings, updating firmware, reducing interference, and, when needed, resetting. Use these troubleshooting techniques to maximize your listening environment.
